Whynter ARC-126MD Bedienungsanleitung Seite 14

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 13
14
REMOTE CONTROL
The portable air conditioner can be switched on by the remote control. To transmit signals from the remote con-
trol to the air conditioner, point the front part of the remote handset towards the control panel on the air condi-
tioner. Reception of the signal is confirmed by a beep. The maximum signal transmission distance is approxi-
mately 8 meters / 26 feet.
NOTE:
Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause
interferences
Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control
and the air conditioner
Remove the batteries if the remote control is not used for long periods
INSTALLING BATTERIES
To insert the batteries, open the flap on the back of the remote control by sliding if off. Strictly adhere to the
polarity signs on the bottom of the battery housing, close the flap once the batteries have been inserted.
Only use two dry LR03 AAA 1.5V Batteries (included) in the remote control
Always change both batteries at the same time
INDICATOR FUNCTION
1 – Mode Indicator
Displays the current selected
mode
(Auto, Cool, Dry, or Fan)
2 – Lock Indicator
Indicates current setting is
locked and cannot be changed
3 – Temperature Display Displays set temperature
4 – Fan (High)
Displays the selected high fan
speed
5 – Fan (Medium)
Displays the selected medium
fan speed
6 – Fan (Low)
Displays the selected low fan
speed
7 – Timer Indicator Indicates Timer mode activated
BUTTONS FUNCTION
8 – Down Button Decreases set temperature/time
9 – Up Button Increases set temperature/time
10 – Mode Button
Controls the 4 function modes:
Auto, Cool, Dry, & Fan
11 – On/Off Button Turns the unit On and Off
12 – Fan Speed Button
Controls the fan speeds: High,
Medium, Low or Auto
13 – Swing Button
Starts or stops louver movement
and set louver angle.
14 – Economy Button Enables Economy mode
15 – Timer On Button
Enables the On timer & set timer
hours
16 – Reset Button Cancels all settings
17 – Timer Off Button
Enables the Off timer & set timer
hours
18 – Lock Button
Locks and Unlocks current set-
ting
19 – LED Display Button Turns on and off the display light
Seitenansicht 13
1 2 ... 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare